Y－HG1型冶金设备标准液压缸www.tdyougang.com，为双作用单活塞杆液压缸，具有结构简单、工作可靠、装拆方便、易于维修、可带缓冲装置及连接方式多样等特点，广泛应用在钢铁、铸造、锻造等冶金行业。

注：以上参数如有特殊要求，请另行注明/If you have any especial requirement to the above data, please note it.
工作压力：16MPa / Working pressure: 16MPa
工作介质：矿物油 / Working medium: mineral hydraulic oil
工作温度：-10℃~+80℃ /Working temperature: -10℃~+80℃
运动速度：<0.5m/s, / Moving speed: <0.5m/s

Y－HG1－E D/d× S L 5 － H L1 Q T2
① ② ③④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ 11
①冶金标准液压缸
②双作用活塞杆*种类型——HG1
③压力等级 E—16MPa
④缸径/杆径（mm）/bore/rod (mm)
⑤行程(mm)/Stroke (mm)
⑥进、出油口连接: L－螺纹连接(用于D≤220);F－法兰连接(用于D≥250)
Connecting mode of inlet & outlet ports:
L－Connecting by thread (using at D≤220) ;
F－Connecting by flange (using at D≥250)
⑦安装方式：见表1/Mounting styles: See table 1
⑧附加位置：H－带缓冲; B－带平衡阀
Adjunctive position: H－with cushion;
B－with balance valve
⑨杆端结构: L1－外螺纹; L2—内螺纹
Rod end structure: L1－male thread; L2—female thread
⑩工作介质: O－液压油; W－高水基(乳化液等介质)
Working medium: O－hydraulic oil;
W－Abundant water (Mixed water )
⑾工作温度:－-10℃~+80℃
Working temperature: T1－-10℃~+80℃

代号Code
安装方式
Mounting mode
代号
Code
安装方式
Mounting mode
J
基本型/Standard
E
后端单耳环
end single eye ring
E1:带关节轴承
with articulating bearing
E2:带轴套/with bushing
F1
前端矩形法兰/Head side rectangle flange
F2
后端矩形法兰/ End side rectangle flange
Z1
前端耳轴/Head side trunnion
F3
前端圆法兰/ Head side circinal flange
Z2
中间耳轴/Middle side trunnion
F4
后端圆法兰/ End side circinal flange
Z3
后端耳轴/End side trunnion
F5
前端方形法兰/ Head side square flange
J1
轴向脚架/Vertical to axis foot type
F6
后端方形法兰/End side square flange
J2
切向脚架①/parallel to axis foot type
注①:安装方式是切向脚架(J2)是非标产品/Notes①: